Brush Liquid Latex Rubber Sole Glue

Description

READ SAFETY DATA SHEET BEFORE USE

•• USE IN A VENTILATED AREA ••

• Available in a 500ml Tub (approx 485 mls of product)
• For painting on to the bottom of new lycra March boots to create non slip sole
• Ok also for new suede bottoms of March boots too!
• Provides a non-slip sole
• Dries light beige to clear in colour – Product can be tinted using (eg black) acrylic paint
• Use in well ventilated area when applying – take all safety precautions
• Use a disposable Brush to spread product, recommended 2-3 THIN coats
• Latex needs to semi-dry between THIN EVEN coats when layering to build up thickness
• Store in the temperature range of 8-30°C. Avoid freezing
• Do NOT apply this product directly onto skin in its liquid state
• NOT for use on hard soles, eg jazz shoe soles or rubber soles
• Product safety and precautions will be included in your purchase parcel
• Keep out of reach of children – store in a safe manner
• Use within 12 months of opening
• USE PRODUCT FOR INTENDED USE ONLY
  INSTRUCTIONS:
  • Place cardboard sole inside of the March boot
  • Stretch lycra sole over cardboard and clip/hold in place
  • Using a brush, proceed to paint THIN EVEN coats. Repeat 2-3 more times
  • Allow to FULLY dry (takes longer in cold weather)
  • Wash brush out immediately
  • Thats it!

DO YOU WANT TO ADD COLOUR TO YOUR LATEX? (eg. to achieve Dark Soles) You can add a colour to the latex if you wish. We have tested so you dont have to! Just add a small amount of (eg black) craft acrylic paint to the latex and mix well. Patch test for your desired colour as you go. Do not add too much acrylic paint to the latex as too much will alter the structure of the latex. The colour of the wet latex is lighter : it will dry darker than the colour you see in the Pot. Make sure you brush multiple THIN coats on to the soles. You can achieve a dark grey sole using this method. Pictures are on this page.

Safety Data Sheet: contact us for further info